How to Use OMI PEMF Equine Products Wirelessly
- Tayla Howerton
- Feb 7
- 2 min read
Got a wiggly pony? Or simply don't want to deal with cords?
I have the solution for you!
Unfortunately, wireless PEMF products are hard to come by, and expensive. This is because a sizeable built-in battery is required to produce the power needed to generate the pulsed electromagnetic fields. This can pose a challenge when treating the legs in particular. OMI PEMF products come with an AC adapter meant to be plugged into an outlet. I treat many horses on a regular basis using the products, so I've devised a system to reduce the risks of loose cords.
What You'll Need
Step 1
Fully charge your power bank.
Attach your Velcro strips to both the power bank and PEMF boot like shown.
Make sure to clean your mounting surface thoroughly with an alcohol wipe and let it dry before mounting the Velcro.
Make sure to mount the strips on the side of the power bank shown in the image.
This is important so that the adapter faces the right way.
Step 2
Sit back and wait. Allow the adhesive to cure for 1-2 hours.
Step 3
When you're ready to use the boot, go ahead and attach the power bank to the boot.
Step 4
Plug the AC adapter into the AC outlet on top of the power bank.
Step 5
Bring the other end of the adapter and plug it into the top of the PEMF Controller.
You'll want to loop the cord around a few times and stick it into the loop on the side of the boot, to keep it from hanging.
Step 6
All done! You're ready to use the boot.
With everything attached, the boot may feel a bit heavy to us, but it is less than 0.5% of the horse's body weight. I have not had any problems using it on horses in crossties or stalls. However, like most therapy boots, the horse shouldn't be turned out, hand walked, or exercised while wearing the boot. Make sure to always wrap the boot snugly.
It's super secure!
コメント